Chevrolet Captiva Service & Repair Manual: Quarter Panel Liner
Chevrolet Captiva Service & Repair Manual / Body & Frame / Quarter Panel Liner
Removal
|
Installation
| Reverse procedure to install. Torque screws to 22 inch lbs. |
Fig. 1 Quarter panel liner removal
Quarter Panel
Section in specified areas only.
Sectioning outside of these areas may compromise the structural integrity
of the vehicle. The door frame can be replaced at factory seams, but requires ...
Rear Body Panel
Do not damage any inner panels
or reinforcements.
If the location of the original
plug weld holes can not be determined, space the plug weld holes every 1
1/2 inches ap ...
More about:
Chevrolet Captiva Service & Repair Manual > Tires: Component Replacement
Tire Pressure Indicator Sensor Replacement
Use the correct fastener in the
correct location. Replacement fasteners must be the correct part number
for that application. Do not use paints, lubricants, or corrosion inhibitors
on fasteners, or fastener joint surfaces, unless specifi ...
Chevrolet Captiva Owners Manual
- Introduction
- In Brief
- Keys, Doors, and Windows
- Seats and Restraints
- Storage
- Instruments and Controls
- Lighting
- Infotainment System
- Climate Controls
- Driving and Operating
- Vehicle Care
- Service and Maintenance
- Technical Data
- OnStar
Chevrolet Captiva Service & Repair Manual
© 2026 Copyright www.ccaptiva.com - 0.006