Chevrolet Captiva Owners Manual: Ignition Transmission Lock Check, Park Brake and P (Park) Mechanism Check

Chevrolet Captiva Owners Manual / Vehicle Care / Vehicle Checks / Ignition Transmission Lock Check, Park Brake and P (Park) Mechanism Check

Ignition Transmission Lock Check

If equipped with a key type ignition, while parked and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position.

The ignition should turn to LOCK/OFF only when the shift lever is in P (Park).
The ignition key should come out only in LOCK/OFF.

Contact your dealer if service is required.

Park Brake and P (Park) Mechanism Check

Warning

When you are doing this check, the vehicle could begin to move.

You or others could be injured and property could be damaged.

Make sure there is room in front of the vehicle in case it begins to roll. Be ready to apply the regular brake at once should the vehicle begin to move.

Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.

To check the parking brake's holding ability: With the engine running and the transmission in N (Neutral), slowly remove foot pressure from the regular brake pedal. Do this until the vehicle is held by the parking brake only.
To check the P (Park) mechanism's holding ability: With the engine running, shift to P (Park). Then release the parking brake followed by the regular brake.

Contact your dealer if service is required.

Starter Switch Check, Automatic Transmission Shift Lock Control Function Check

Starter Switch Check Warning When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. Before starting this check, be sure ...

Wiper Blade Replacement

Windshield wiper blades should be inspected for wear and cracking. See Maintenance Schedule on page 11-2. Replacement blades come in different types and are removed in different ways. For pr ...

More about:

Chevrolet Captiva Service & Repair Manual > Steering & Suspension: Stabilizer Bar Bushing R&R
Front 1. Remove front tire and wheel assemblies. 2. Remove front stabilizer shaft insulator clamp bolt, Fig. 1. 3. Remove front stabilizer shaft insulator clamp, Fig. 1. 4. ...