Chevrolet Captiva Owners Manual: License Plate Lamp, Replacement Bulbs

Chevrolet Captiva Owners Manual / Vehicle Care / Bulb Replacement / License Plate Lamp, Replacement Bulbs

License Plate Lamp

To replace one of these bulbs:

Remove the two screws holding each of the license plate lamps to the fascia.

License Plate Lamp

Turn and pull the license plate lamp forward through the fascia opening.
Turn the bulb socket counterclockwise and pull the bulb straight out of the socket.
Push the new bulb into the bulb socket and turn it clockwise to lock it into place.
Push and turn the license plate lamp back through the fascia opening.
Reinstall the two screws holding the license plate lamp to the fascia.

Replacement Bulbs

Replacement Bulbs

For replacement bulbs not listed here, contact your dealer.

Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps

To replace one of these bulbs: Back-Up Lamp Turn Signal Lamp Stoplamp/Taillamp Taillamp Open the liftgate. See Liftgate on page 2-8. Remove the two screws holding in the ...

Electrical System

...

More about:

Chevrolet Captiva Service & Repair Manual > Brakes: Disc Brake Caliper R&I
Front Removal Caution: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bea ...