Chevrolet Captiva Manuals

Chevrolet Captiva Service & Repair Manual: Engine Coolant Expansion Tank, Replace

Chevrolet Captiva Service & Repair Manual / Air Conditioning & Heater / Engine Coolant Expansion Tank, Replace

1. Drain engine coolant into suitable container.
2. Remove coolant expansion tank inlet hose from expansion tank.
3. Remove coolant expansion tank outlet hose from expansion tank.
4. Remove coolant expansion tank nut (1), bolt (2) and expansion tank (3), Fig. 1.
5. Reverse procedure to install. Torque nut and bolt to 71 inch lbs.

Fig. 1 Engine coolant expansion tank removal

    Cooling System Pressure, Test
    Caution: To avoid danger of being burned, do not remove radiator cap while engine and radiator are still hot, as fluid and steam can be blown out under pressure. If radiato ...

    HVAC Blower Motor R&R
    1. Disconnect electrical connector from blower motor. 2. Remove blower motor bolts from HVAC module, Fig. 1. ...

    More about:

    Chevrolet Captiva Service & Repair Manual > Steering & Suspension: Wheel Hub & Bearing Assembly R&R
    Front Allow threadlocker to cure approximately 10 minutes before installing front wheel bearing and hub assembly bolts. 1. Separate front wheel drive shaft at front wheel bearing and hub assembly. 2. Remove front brake ...

    Chevrolet Captiva Owners Manual

    Chevrolet Captiva Service & Repair Manual

    © 2022 Copyright www.ccaptiva.com - 0.005