Chevrolet Captiva Service & Repair Manual: Hood
Warning: When a hood hold open
device is being removed or installed, provide alternate support to avoid
the possibility of damage to the vehicle or personal injury. |
Removal
1. |
Disconnect hood strut. |
2. |
Remove four hood hinge bolts, Fig.
1. |
|
Installation
Reverse procedure to install.
Toque hood hinge bolts to 18 ft. lbs. |
Adjustment
1. |
Loosen hinge to body bolts to adjust
hood fore and aft and cross vehicle. Position hood as required,
Fig. 2. |
2. |
Adjust hood latch and hood bumpers
to adjust hood up and down at front of hood, Fig. 3. |
3. |
Torque hinge and latch bolts
to 18 ft. lbs. |
|
Fig.
1 Hood removal
Fig.
2 Hood hinge adjustment
Fig.
3 Hood adjustment
Removal
1.
Remove front bumper as outlined in
Front Bumper.
2.
Remove radiator grille emblem.
3.
Remove six ...
Removal
1.
Remove radiator opening upper cover.
2.
Remove three latch mounting bolts,
Fig. 1.
3.
Remove hood ...
More about:
Chevrolet Captiva Service & Repair Manual > Brakes: Brake Rotor Deglaze
Caution: Whenever brake rotor
has been separated from wheel bearing flange, clean any rust or foreign
material from mating surface of rotor and flange with a suitable hub cleaning
kit. Failure to do this may result in increased lateral runout of rotor
and brake pulsation.
...