Chevrolet Captiva Service & Repair Manual: Rear Bumper Reinforcement

Removal

1.	Remove rear bumper as outlined in Rear Bumper.

2.	Remove bolts and rear impact bar, Fig. 1.

Installation

Reverse procedure to install. Torque bolts to 16 ft. lbs.

Fig. 1 Rear bumper reinforcement removal

Removal 1. Disconnect battery ground. 2. Disconnect connector of rear object sensor, if equipped. 3. Remove ...

Removal 1. Disable Supplemental Inflatable Restraint (SIR) system. 2. Remove rear door trim panel. 3. Remov ...

Chevrolet Captiva Service & Repair Manual > Steering & Suspension: Suspension Coil Spring R&R
Front Disassembly Caution: Do not allow absorber rod to rotate during disassembly/assembly. Use hand tools to keep absorber rod from rotating. If air tools are used, and rod is allowed to rotate, damage to absorber may occur. Caution: Do not handle top mount ass ...

Chevrolet Captiva Owners Manual