Chevrolet Captiva Service & Repair Manual: Yaw Sensor R&R
1. |
Disable the SIR system. |
2. |
Remove front floor rear console. |
3. |
Remove the console bracket and bolts. |
4. |
Position the wire harness assembly
out of the way. |
5. |
Disconnect any electrical connectors. |
6. |
Remove electronic brake control vehicle
yaw sensor assembly, Fig. 1. |
7. |
Reverse procedure to install. Torque
sensor bolts to 71 inch lbs. |
|
Fig.
1
Front
1.
Raise and support the vehicle.
2.
Remove the tire and wheel.
3.
Remove the wheel bearing and hub assembl ...
1.
Remove the front floor console accessory
trim plate upper, Fig. 1.
2.
Remove parking brake actuator switch
bolts, Fig. 1.
...
More about:
Chevrolet Captiva Service & Repair Manual > Maintenance: Battery Test
Warning: A battery can explode
if you do not follow proper procedure, causing serious injury to anyone
nearby. Follow all procedures carefully and keep sparks and open flames
away from battery.
Use either a JCI or Bear ARBST
tester, and follow manufacturer's p ...