Chevrolet Captiva Service & Repair Manual: Radiator, Replace
| 1. |
Drain cooling system into a suitable
container. |
| 2. |
Raise and support vehicle. |
| 3. |
Remove front fascia support. |
| 4. |
Remove front bumper impact bar. |
| 5. |
Remove radiator closeout panel. |
| 6. |
Disconnect compressor hose/pipe from
clip at bottom of fan shroud. |
| 7. |
Remove mounting bolts from condenser
using care with upper lefthand bolt to clear compressor hose/pipe,
reposition and support condenser. |
| 8. |
Remove radiator hose inlet. |
| 9. |
Remove radiator hose outlet. |
| 10. |
Disconnect transmission oil cooler
lines from attaching clips on radiator. |
| 11. |
Remove fan shroud bolts and reposition. |
| 12. |
Remove two radiator support bolts and
clips. |
| 13. |
Remove radiator from vehicle. |
| 14. |
Reverse procedure to install, note
following: |
| |
a. |
Fill cooling system with suitable coolant. |
| |
b. |
Inspect transmission oil level and
fill with suitable oil, as required. |
|
Inlet
1.
Drain cooling system into a suitable
container.
2.
Reposition hose clamp at heater core
and remove hose.
...
Heater Hose, Replace
Electrical