Chevrolet Captiva Service & Repair Manual: Power Steering Pump R&R
| Access power steering pump bolts
through holes in power steering pump pulley. Pulley is illustrated off pump
for clarity only, it is not required to remove pulley in vehicle. |
| 1. |
Remove power steering fluid reservoir. |
| 2. |
Remove power steering gear inlet hose
at power steering pump. |
| 3. |
Remove power steering pump bolts,
Fig. 1. |
| 4. |
Remove power steering pump, Fig.
1. |
| 5. |
Transfer components, as required. |
| 6. |
Reverse procedure to install, noting
following: |
| |
a. |
Torque power steering pump bolts
to 16 ft. lbs. |
| |
b. |
Fill and bleed power steering system. |
|
Fig.
1
Steering Gear Outlet & Fluid Reservoir Inlet
Removal
1.
Remove as much power steering fluid
from power steering fluid reservoir as possible.
...
Use clean, new power steering
fluid type only.
Hoses touching frame, body or
engine may cause system noise. Verify that hoses do not touch any other
section of vehicle. ...
Power Steering Line R&R
Power Steering System Bleed