1. |
Fill pump reservoir with fluid to minimum
system level, "FULL COLD" level, or middle of hash mark on cap stick
fluid level indicator. |
2. |
If equipped with hydro-boost, fully
charge hydro-boost accumulator, noting following: |
|
b. |
Firmly apply brake pedal 10-15 times. |
3. |
Raise vehicle until front wheels are
off ground. |
4. |
Key on engine OFF, turn steering wheel
from stop to stop 12 times. Vehicles equipped with hydro-boost
systems or longer length power steering hoses may require turns
up to 15-20 stop to stops. |
5. |
Verify power steering fluid level per
operating specification. |
6. |
Start engine. Rotate steering wheel
from lefthand to righthand. Inspect for signs of cavitation or fluid
aeration (pump noise/whining). |
7. |
Verify fluid level. Repeat bleed procedure,
as required. |
|