Chevrolet Captiva Service & Repair Manual: Suspension System Inspect
| A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern. |
| 1. |
Inspect tire pressures with all normal
loads in vehicle and tires cold. Refer to vehicle certification
(VT) label. |
| 2. |
Verify that all tires are sized to
specification. Refer to VT label. |
| 3. |
Inspect tires for incorrect wear and
damage. Install new tires as required. |
| 4. |
Remove any excessive accumulation of
mud, dirt, or road deposits from chassis and underbody. |
| 5. |
Inspect for aftermarket changes to
steering, suspension, and wheel and tire components (such as competition
or heavy duty). |
| 6. |
Visually inspect components for damage
or wear as follows: |
| |
c. |
Springs as well as incorrect spring
usage. |
| |
d. |
Air suspension components, if equipped. |
| |
h. |
Steering system components. |
| 7. |
Connect a suitably programmed scan
tool to vehicle DLC. Ensure no DTCs are present. |
| 8. |
If an obvious cause for an observed
or reported condition is found, correct cause as required. |
| 9. |
Road test vehicle. Stay alert for any
abnormal sounds or vibrations that could originate from suspension
system. |
|
Front
Disassembly
Caution: Do not allow absorber
rod to rotate during disassembly/assembly. Use hand tools to keep absorber
rod from rotating. If air tools are used, and rod is allowe ...
Inner
Removal
Caution: Do not change steering
gear preload adjustment before moving inner tie rod from steering gear.
Changing steering gear preload adjustment before moving inner tie ...
More about:
Chevrolet Captiva Owners Manual > Vehicle Messages: Brake System Messages
PARK BRAKE RELEASED
For vehicles with the Electric
Parking Brake, this message
displays when the parking brake
has been released from the set
position. See Parking Brake on
page 9-26 for more information.
PARK BRAKE SET
For vehicles with the Electric
Parking Brake, this message
displays wh ...