Chevrolet Captiva Service & Repair Manual: Toe Adjust

Chevrolet Captiva Service & Repair Manual / Wheel Alignment / Toe Adjust

Front

Steering linkage inner tie rod must rotate freely from boot seal surface. Do not allow boot to rotate.

1.	Position and lock steering wheel with vehicle with wheels in straight forward position.

2.	Loosen both of steering linkage inner tie rod nuts, Fig. 1.

3.	Loosen steering linkage inner tie rod seal to boot surface.

4.	Rotate steering linkage outer tie rod to increase or decrease toe angle specifications, using a wrench.

5.	Torque steering linkage inner tie rod nuts to 44 ft. lbs.

6.	Inspect toe angle to ensure proper adjustment and adjust, as required.

Rear

If experiencing problems in adjusting rear toe, replace existing nut with service cam nut to eliminate adjusting problem.

1.	Loosen adjustment link nut (2), Fig. 2.

2.	Rotate adjustment link bolt (1) to adjust toe setting, Fig. 2.

3.	Snug adjustment link nut (2), do not tighten at this time, Fig. 2.

4.	Inspect rear toe specifications and adjust again, as required.

5.	Hold adjustment link bolt (1), Fig. 2.

6.	Torque adjustment link nut (2) to 118 ft. lbs., Fig. 2.

7.	Repeat procedure for other rear wheel.

Fig. 1

Fig. 2

Wheel Alignment Adjust

Front Caster Front caster is not adjustable. If front caster angle is not within specifications, inspect for suspension support misalignment or front suspension damage. Replace any da ...

More about:

Chevrolet Captiva Owners Manual > Initial Drive Information: Climate Controls
The heating, cooling, and ventilation for the vehicle can be controlled with this system. For vehicles with the remote start feature, the climate control system functions as part of the remote start feature. See Remote Keyless Entry (RKE) System Operation on page 2-2. Climate Control System ...