Chevrolet Captiva Service & Repair Manual: Parking Brake Shoes R&R
| Warning: Avoid taking the following
actions when you service wheel brake parts: Do not grind brake linings,
do not sand brake linings and do not clean wheel brake parts with a dry
brush or with compressed air. |
| Warning: Some models or aftermarket
brake parts may contain asbestos fibers which can become airborne in dust.
Breathing dust with asbestos fibers may cause serious bodily harm. Use a
water-dampened cloth in order to remove any dust on brake parts. Equipment
is available commercially in order to perform this washing function. These
wet methods prevent fibers from becoming airborne. |
| Use denatured alcohol to clean
brake dust or grease from the park brake shoes and hardware. |
| Apply a small amount of high temperature
silicone grease to the brake shoe and backing plate contact points. |
| Apply a small amount of high temperature
silicone grease to both sides of the actuator lever pivot pin. |
| Clean the threads and apply high
temperature grease to the adjuster screw. |
| Refer to Fig. 1
for parking brake shoe service. |
Fig.
1
Warning: Avoid taking the following
actions when you service wheel brake parts: Do not grind brake linings,
do not sand brake linings and do not clean wheel brake parts with a dry
b ...
Adjustment procedure
If the rear wheels rotate during the following test, repeat the adjustment procedure completely.
...
Parking Brake Shoes R&I
Parking Brake System Adjust